|
DiamCalc Standard
2.x is just 280 US$.
* At this page you can only purchase the DiamCalc
2 software. If you want to purchase Upgrade
from DiamCalc 1.x to DiamCalc 2.x please contact
the support
service
IMPORTANT NOTE: THE LICENSE GIVES YOU
THE RIGHT TO USE DIAMCALC ON A SINGLE COMPUTER
(IDENTIFIED BY THE REGISTRATION NUMBER YOU
WERE PROVIDED DURING REGISTRATION). WHENEVER
YOU WANT TO USE THE DIAMCALC ON ANY OTHER
COMPUTER(S) YOU HAVE TO PURCHASE ADDITIONAL
LICENSE(S).
If you would
like to buy DiamCalc with paypal, follow these
steps:
1. Download it from
OctoNus
Software WWW page or
mirror
site. The software is locked and
will work as a demo-version (Marquise cut
only) until purchased.
2. Install the software
on the same computer where you plan to use
it.
(see "How to install
DiamCalc?").
3. Run DiamCalc to
be sure that it is compatible with your computer
configuration, OS and other installed applications.
If you see a message "The software has
expired" press OK button, otherwise run
Help/Register menu command.
4. You will be presented
with the "Register dialog" with
the following fields:
- Serial number.
It identifies the instance of DiamCalc that
you bought. The serial number will be given
to you during a purchase process.
- Registration number. It identifies
the computer where the software is installed.
- Registration key. It allows to use
the software on the specific computer.
Write down the "Registration
number" as it will be required in
the next steps.
5. Open your WWW browser
and go to this page to step # 6. If your computer
does not have an Internet connection or you
prefer to connect Internet from a different
computer then open WWW browser on the different
computer.
6. Click on the "PayPal
buy it now" button below and follow instructions
on the Web page to complete the purchase.
When you are presented with the "Special
Instructions (optional)” filed, please enter
the Registration number in this filed.
7. When the purchase
is completed, you will be granted with a serial
number and a registration key to activate
all DiamCalc features. Enter them into "Register"
dialog and press Register button. If registration
is successful, the next time you start DiamCalc
all features will be enabled.
|
